6.0L Powerstroke Engine
We offer three kinds of 6.0L Powerstroke Engine:
Street Series | Tow/Haul Series | Tow/Haul HD Series
DFC Diesel Rebuilders prides itself in being the highest quality 6.0 Powerstroke engine on the market. This is why we can back our engines with a 5 year 160,000km warranty that we stand behind.
Our engines have been re-manufactured to factory specs using all new industry recognized name brand parts that meet and exceed OEM specifications. The block has been professionally machined and bored for use with the next oversized piston.
All New OEM or equivalent pistons, rings, and gaskets are used to ensure quality and consistency of our engines. Our Re-manufactured Cylinder Heads have all new seats, guides, valves, and stem seals as well as being resurfaced and magnafluxed.
Short Block Engines include:
- Front cover with seal
- Rear cover with main seal
- Oil pan
- All new internal components
- Complete gasket kit for installation
- Important installation instructions
- ARP connecting rod bolts
- Complete short block assembly and gaskets, plus cylinder heads
- Complete Top End gasket kit to finish installation.
- All rockers/pushrods installed.
- ARP series 2000 head studs or OptiTorque head studs depending on availability
- ARP connecting rod bolts
All remanufactured engines are serviced with Rottler CNC machining, which guarantees high quality results.
To learn more about Rottler’s innovative, industry leading machines please visit: www.rottlermfg.com
STREET SERIES
Our 6.0 Powerstroke Street Series engines are DFC’s flagship product. Built for work trucks, daily drivers and the diesel enthusiast in mind these engines are a vast improvement from stock as they contain important upgrades to common problem areas. Street Series are Long Blocks with ARP series 2000 head studs or OptiTorque head studs depending on availability.
FEATURES
- Most comprehensive 5 year / 160,000 km (100,000 mi) warranty in North America.
- All engines come standard with Total Seal gapless piston rings.
- Comes assembled with ARP series 2000 head studs or OptiTorque head studs depending on availability.
- Comes assembled with ARP connecting rod bolts.
- Street series, Tow/Haul series and Tow/Haul HD series engines available.
- Machined with some of the most advanced Rottler machining equipment in North America.
- Improved gasket sealing methods in common leakage areas.
- All NEW pistons, rings, bearings, gaskets, seals, valves, springs, hardened seats, stem seals and cast guides standard in every engine.
TOW/HAUL SERIES
The DFC Diesel 6.0 Powerstroke Tow/Haul Series engine comes standard with all the upgrades found in the Street Series model as well as several enhancements to make this engine perfect for towing, hauling and performance applications up to 550 HP. DFC long block assembly including Total Seal gapless piston rings.
THIS BUILD CONSISTS OF:
Contains all upgrades of the Street Series and includes;
- DFC long block assembly
- ARP series 2000 head studs or OptiTorque head studs depending on availability
- ARP connecting rod bolts
- O-ringed cylinder heads
- Stage 2 billet camshaft
- Chamfered piston bowls
- Ceramic coated piston crowns and dry film coated skirts
- Manton HD push rods
*Rated HP is measured at flywheel same as factory engine HP ratings
TOW/HAUL HD SERIES
The DFC Diesel 6.0 Powerstroke Tow/Haul HD series was built for the enthusiast that wants to be capable of up to 900 HP but that will regularly drive on the street and tow trailers between 500 and 750 HP. This model comes equipped with all the features of the Street and Tow/Haul Series but adds a set of Wagler or Carrillo connecting rods, New OEM balancer, HD flexplate and balanced rotating assembly.
*Engines may come with either rod depending on availability*.
THIS BUILD CONSISTS OF:
Includes all the upgrades of the Street Series & Tow/Haul Series as well as includes;
- Wagler or Carrillo connecting rods
- New OEM balancer
- HD flexplate
- Balanced rotating assembly
*Rated HP is measured at flywheel same as factory engine HP ratings
DFC can build a very durable and robust combination for your specific needs and all still backed with a 5 year 160,000km (100,000mi) parts and labor warranty. Make us your only choice for 6.0 Powerstroke diesel engines in North America.
Tow/Haul and Tow/Haul HD series engines still come backed with a 5 year 160,000 km (100,000 mi) warranty however are considered a severe duty application and require more frequent service intervals as stated in warranty manual supplement for warranty coverage to be considered.
THE COMPARISON
Comes standard with 5 yr 160,000 km (100,000 mi) parts and labor warranty
DFCDiesel
Competitor #1
Competitor #2
Competitor #3
Comes standard with ARP Series 2000 head studs
DFCDiesel
Competitor #1
Competitor #2
Competitor #3
SBI nickel valve seats replace OE casting material preventing cracks
DFCDiesel
Competitor #1
Competitor #2
Competitor #3
Cylinder blocks are blueprinted to tighter tolerances than OEM specifications using our Rottler F69 ATC
DFCDiesel
Competitor #1
Competitor #2
Competitor #3
FEATURES
Main Cap sealing
DFC adds an additional bead of high quality silicone to the main cap plate inside the OEM rubber seal giving an additional layer of protection from potential main cap plate oil leaks on all 6.0 and 6.4 engines.
Valve Seats
The factory induction hardened seat material in the 6.0 and 6.4 is machined out and hardened SBI valve seats are installed in every intake and exhaust seat pocket preventing premature cracking in the future.
Machining
Our Rottler equipment allows us to remanufacture the Powerstroke engine’s to tighter than OEM tolerances resulting in a longer lasting more efficient engine assembly.
Valves
DFC installs new valves from MAHLE/Clevite or SBI in every cylinder head we remanufacture. Most companies will re-grind and install used again.
Weighed Rotating Assemblies
Our production engines are typically matched with near identical weight piston and connecting rod assemblies giving our customers a smoother running and quieter engine.
ARP Head Studs
Our 6.0 Powerstroke engines come standard with ARP series 2000 head studs or OptiTorque head studs depending on availability to further enhance the engines durability by preventing head gasket failure.
Core Criteria
Ensuring every engine is built to the same high quality standards as the next DFC is very strict on what is remanufactured rejecting components that require considerable “restoring” to specifications.
Valve Springs
Instead of just testing old springs and reusing like most remanufacturers DFC installs brand new SBI valve springs that are still tested for proper spring pressure on every cylinder head we remanufacture.
Cast Guides
Common industry practice is to check guide clearance and if within specification, not replace. DFC considers this practice unacceptable and installs new cast SBI guides in every cylinder head we remanufacture.
Main Cap sealing
DFC adds an additional bead of high quality silicone to the main cap plate inside the OEM rubber seal giving an additional layer of protection from potential main cap plate oil leaks on all 6.0 and 6.4 engines.